EasyManua.ls Logo

Nissan LEAF 2018 - Lane Departure Warning (LDW) and Intelligent Lane Intervention (I-LI); Blind Spot Warning (BSW) with Rear Cross Traffic Alert (RCTA)

Nissan LEAF 2018
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
12
LANE DEPARTURE WARNING (LDW) AND INTELLIGENT LANE
INTERVENTION (I-LI) (if so equipped)
The LDW system can help alert the driver when the vehicle is traveling
too close to either the left or the right side of a traveling lane.
The system will operate when the vehicle is driven at speeds of
approximately 37 mph (60 km/h) and above and only when the lane
markings are clearly visible on the road.
When the vehicle approaches either the left or the right side of the traveling lane,
the LDW system will chime and the LDW light
1
on the instrument panel will
blink to alert the driver.
The I-LI system can assist the driver in returning the vehicle to the center of the
traveling lane by applying individual brake pressure to the left or right wheels for a
short period of time.
The LDW system can be turned on and o through the vehicle information display.
Please see your Owner’s Manual for important safety information, system limitations, and additional
operating and feature information.
For more information, refer to the “Instruments and controls (section 2)” and the “Starting and driving
(section 5)” of your Owner’s Manual.
BLIND SPOT WARNING (BSW) WITH REAR CROSS TRAFFIC
ALERT (RCTA) (if so equipped)
The BSW system helps to alert the driver when another
vehicle moves into the vehicle’s detection zone.
An indicator light
1
located on the outside mirrors
will illuminate if the radar sensors detect a vehicle in
the detection zone.
The warning systems can be deactivated using the
Settings menu. When the system is o, the indicator
light
1
on the mirrors and the indicator light
2
in
the vehicle information display will extinguish.
The indicator lights
1
will illuminate after the ignition switch is
ON and the BSW system is enabled. This indicates that the BSW
system is operational.
The RCTA system helps to alert the driver of an approaching
vehicle when the driver is backing out of a parking space. The
system operates when the shift lever is in the R (REVERSE) position and the
vehicle speed is less than approximately 5 mph (8 km/h).
The radar sensors detect an approaching vehicle from up to 66 ft (20 m). The
sensors are located on both sides near the rear bumper. The system gives visual
and audible warnings if an approaching vehicle is detected.
The RCTA system can be turned on or o through the Settings menu in the
vehicle information display.
Please see your Owner’s Manual for important safety information, system limitations, and additional
operating and feature information.
For more information, refer to the “Instruments and controls (section 2)” and the “Starting and driving
(section 5)” of your Owner’s Manual.
1
1
2
2948550_18a_Leaf_QRG_100317.indd 12 10/3/17 3:57 PM

Related product manuals