1. If you must install a booster seat in the
front seat, move the seat to the rearmost
position.
2. Position the booster seat on the seat. Only
place it in the forward-facing direction. Al-
ways follow the booster seat manufacturer’s
instructions.
3. The booster seat should be positioned on the
vehicle seat so that it is stable.
If necessary, adjust or remove the head re-
straint or headrest to obtain the correct
booster seat fit. If the head restraint or head-
rest is removed, store it in a secure place. Be
sure to reinstall the head restraint or
headrest when the booster seat is re-
moved. See ⬙Head restraints⬙ or ⬙Adjustable
headrests⬙ for head restraint or headrest ad-
justment, removal and installation information.
If the seating position does not have an adjust-
able head restraint or headrest and it is inter-
fering with the proper booster seat fit, try an-
other seating position or a different booster
seat.
4. Position the lap portion of the seat belt low
and snug on the child’s hips. Be sure to follow
the booster seat manufacturer’s instructions
for adjusting the seat belt routing.
5. Pull the shoulder belt portion of the seat belt
toward the retractor to take up extra slack. Be
sure the shoulder belt is positioned across the
top, middle portion of the child’s shoulder. Be
sure to follow the booster seat manufacturer’s
instructions for adjusting the seat belt routing.
6. Follow the warnings, cautions and instruc-
tions for properly fastening a seat belt shown
in ⬙Three-point type seat belt with retractor⬙.
Front passenger seat Front passenger seat
Safety–Seats, seat belts and supplemental restraint system 1-33
To Next Page
Loading...
