INSIDE REARVIEW MIRROR
Adjust the angle of the inside rearview mirror to
the preferred position.
Automatic anti-glare type (if so
equipped)
The inside mirror is designed so that it automati-
cally changes reflection based on the intensity of
the headlights of the vehicle behind.
The anti-glare system automatically turns on
when the power switch is moved to the ON
position.
When the system is turned on, the indicator light
䊊
A
will illuminate and excessive glare from the
headlights of the vehicle behind you will be re-
duced.
Type A: Push the
switch
䊊
B
for 3 seconds
to turn off the automatic anti-glare system. The
indicator turns off when the system is off. Push
the
switch again for 3 seconds to turn the
system on.
Do not hang any objects on the mirror or
apply glass cleaner to it. Doing so will re-
duce the sensitivity of the sensor
䊊
C
, result-
ing in improper operation.
Type B: Push the “䡩” switch
䊊
C
to make the inside
rearview mirror operate normally. The indicator
Type A
Type B
MIRRORS
3-22 Pre-driving checks and adjustments
To Next Page
Loading...
