Tire and Loading Information label
䊊
1
Seating capacity: The maximum number of
occupants that can be seated in the ve-
hicle.
䊊
2
Vehicle load limit: See ⬙Vehicle loading in-
formation⬙ in the ⬙Technical and consumer
information⬙ section.
䊊
3
Original size: The size of the tires originally
installed on the vehicle at the factory.
䊊
4
Cold tire pressure: Inflate the tires to this
pressure when the tires are cold. Tires are
considered COLD after the vehicle has
been parked for 3 or more hours, or driven
less than 1 mile (1.6 km) at moderate
speeds. The recommended cold tire infla-
tion is set by the manufacturer to provide
the best balance of tire wear, vehicle han-
dling, driveability, tire noise, etc., up to the
vehicle’s GVWR.
䊊
5
Tire size — see ⬙Tire labeling⬙.
䊊
6
Spare tire size or compact spare tire size (if
so equipped)
Maintenance and do-it yourself 8-27
To Next Page
Loading...
