[ Edit: 2016/ 11/ 24 Model: E12-A ]
1-28 Safety — seats, seat belts and supplemental restraint system
JVR0152X
. Hitting a curb, pavement edge or hard surface at
high speed
. Falling into a deep hole or ditch
. Landing hard on the ground after jumping
When the SRS air bag is unlikely to deploy
GUID-CA91CB55-8CB3-4BD1-B2E6-EFD53EAEB186
The SRS air bags may not deploy in cases where the
impact is not forceful enough to inflate the SRS air
bags.
For example, if the vehicle strikes an object, such as a
parked vehicle or sign pole, which can move or deform
on impact, the SRS air bags are unlikely to deploy.
Supplemental front-impact air bags:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
JVR0154X
. Striking a vehicle of the same class that is parked
. Crashing into a solid utility pole
JVR0155X
. Running under the tail gate of a truck
. A frontal offset impact to the guard rails
When the SRS air bag will not deploy
GUID-BBFE9B05-8D0C-49AC-A5DC-C0890F7113FD
Once the SRS air bag has inflated, the air bag module
will not function again if your vehicle collides with
another vehicle or an object.
Other examples where the SRS air bag will not deploy
are shown in the following illustrations.
Supplemental front-impact air bags:
GUID-11F97BB9-9503-47D0-8BB9-62C812293875
JVR0159X
. A collision from the side or rear
. Vehicle rollover
PRE-TENSIONER SEAT BELT SYSTEM
E12-A-120227-B99CD8AE-7A91-4B2C-9ACA-0A9FE047F386
WARNING:
. The pre-tensioner seat belt cannot be re-
used after activation. It must be replaced
together with the retractor and buckle as a
unit.
. If the vehicle becomes involved in a collision
but the pre-tensioner is not activated, be
sure to have the pre-tensioner system
Condition:
To Next Page
Loading...