Nissan NOTE - Page 209

Removing the wheel lock nut:
1. Insert the wheel lock key j1 to the wheel lock
nut.
2. To remove the wheel lock nut, turn the wheel
lock key anticlockwise using the wheel wrench.
CAUTION
•
Do not use a power tool to remove the wheel
lock nuts.
•
When installing the wheel, tighten the wheel
lock nuts to the same tightening torque as the
normal wheel nuts. For details, see “Installing
the wheel” earlier in this section.
NOTE
•
Make sure to keep the wheel lock key in
the vehicle. Otherwise, wheels cannot be
removed and the service cannot be per-
formed.
•
The wheel lock nut has an individual code.
A wheel lock key with other than the indi-
vidual code cannot remove the wheel lock
nut. If you lose the wheel lock key, contact
a NISSAN dealer for a duplicate with the
original wheel lock key code.
•
Record the key number as shown on the
key code card on the “Security informa-
tion” page at the end of this manual and
keep it in a safe place, not in the vehicle. If
you loose the wheel lock key, see your
NISSAN dealer for a duplicate with the
original wheel lock key code.
•
When you ask for a service at a NISSAN
dealer or qualified workshop, make sure
that the lock key is in the vehicle. Other-
wise, wheels cannot be removed and the
service cannot be performed.
TYRE PRESSURE MONITORING
SYSTEM (TPMS) (where fitted)
j
A
Tyre valve with sensor
WARNING
•
If the TPMS indicator light illuminates while
driving:
– avoid sudden steering manoeuvres
– avoid abrupt braking
– reduce vehicle speed
– pull off the road to a safe location
– stop the vehicle as soon as possible
•
Driving with under-inflated tyres may perma-
nently damage the tyres and increase the like-
lihood of tyre failure. Serious vehicle damage
could occur which may lead to an accident
and could result in serious personal injury.
NCE143Z
NCE373
In case of emergency 6-7