WINDSCREEN WIPER BLADES
Cleaning
If the windscreen does not become clear after using
the windscreen washer or if the wiper blades chat-
ter when operating the windscreen wipers, wax or
other materials may be on the windscreen and/or
wiper blades.
Clean the outside of the windscreen surface with a
washer solution or mild detergent. Your windscreen
is clean if beads do not form when rinsing with wa-
ter.
Clean the blade by wiping it with a cloth soaked in a
washer solution or a mild detergent. Rinse the blade
with water. If your windscreen is still not clear after
cleaning the blades and using the wipers, replace
the blades.
Be careful not to clog the washer nozzle. This may
cause improper windscreen washer operation. If the
nozzle is clogged, contact a NISSAN dealer or quali-
fied workshop.
Replacing
1. Lift the wiper arm away from the windscreen.
2. Push and hold the release tab jA , and then move
the wiper blade down the wiper arm to remove
j1.
3. Remove the wiper blade.
4. Insert the new wiper blade onto the wiper arm
until it clicks into place.
CAUTION
•
After wiper blade replacement, return the
wiper arm to its original position. Otherwise
the wiper arm or the engine bonnet may be
scratched and may cause damage.
•
Worn windscreen wiper blades can damage
the windscreen and impair driver vision.
SDI2048Z
WIPER BLADES
8-18 Maintenance and do-it-yourself
To Next Page