Do you have a question about the Nissan patrol and is the answer not in the manual?
Covers specific information and considerations for the ZD30 engine, including protection measures and reliability.
Discusses the reliability of the ZD30 engine, common opinions on fault causes, and modification impacts.
Details manual extraction of ECU fault codes, provides a fault code table, and explains clearing procedures.
Provides guidance on tyre inflation, tread checking, and analysis of tyre wear patterns.
Explains different types of tyre wear (under/over inflation, cupping, sawtooth) and their causes.
Discusses common issues with the 5th gear in GU 5-speed gearboxes and available parts.
Details the importance of air filters, maintenance, and the use of genuine Nissan filters.
Explains common problems with ZD30 belt tensioners, including bearing and bush wear.
Provides a step-by-step guide on how to block the EGR system for improved engine performance.
Explains the function of the Brake Proportioning Valve (BPV) and its technical/plain English descriptions.
Details how to adjust the BPV bracket after lifting the vehicle for proper brake balance.
Explains wheel offset, its types (positive, zero, negative), and why it affects vehicle dynamics.
Describes how the vehicle's speedometer system works, including dash unit, sender, and gear.
Covers changing the speedo gear and using electronic correction devices.
Explains castor angle, its importance after lifting, and available correction kits.
Explains factors like Camber, Castor, Toe-in/out, Wheel Balance, and Tyre Pressures.
Discusses the issue of dashboard bubbling on 2005 GU4 and later models due to sun exposure.
Details the ISO 5011 test scope, methodology, capacity, efficiency, and flow restriction.
Measures the filter's overall ability to capture dirt.
Measures dirt holding capacity before reaching maximum restriction.
Presents results for dirt passed and initial flow restriction.
Shows filter test durations vs. dirt passed and dust loading curves.
Explains what chip tuning and performance modules are, including diesel tuning devices.
Covers basic fuel units, multi-point adjustment, and desirable fuel mapping.
Discusses the technical difficulty and benefits of independent injection timing control.
Highlights the importance of engine durability in performance tuning.
Explains differential types like open and their function in power distribution.
Covers intercooler types (air-to-air, air-to-liquid) and their applications.
Explains MAF sensor function, types (hot wire), and benefits.
Details the PCV valve's function, history, system operation, and maintenance.
Explains the basic components and operation of a turbocharger system.
Explains the function and types of wastegates in controlling boost pressure.
Guides turbocharger selection and compares journal vs. ball bearing types.
Compares bearing performance in terms of response, oil flow, durability, and options.
Explains All Terrain, Mud Terrain, Bias-Ply, and Radial tyre types.
Details markings like Tire Type, Width, Aspect Ratio, Construction, Wheel Diameter, and Load Index.
Explains UTQG ratings including Tread Wear, Traction, and Temperature.
Explains designations for light truck tyre sizes using aspect ratio and inches.
Describes tire components like Belts, Carcass, and Inner Liner.
Covers winch sizing, usage frequency, budget, and dimensional limitations.
Explains Permanent Magnet and Series Wound motors used in winches.
Explains Planetary, Worm, and Spur gear trains and their efficiencies.
Details solenoid function, mounting options, and configurations.
Defines wheel terms like Offset, Centreline, Bolt Circle Size, and other measurements.
Covers engine oil basics, lubrication, base stocks, and additives.
Describes Conventional, Hydroprocessed, Severe Hydroprocessed, and Semi-Synthetic oils.
Defines key terms like Boost Spike, ECU, EFI, EGT, EGR, and MAF.
| Brand | Nissan |
|---|---|
| Model | patrol |
| Category | Automobile |
| Language | English |












Loading...