Need help?Do you have a question about the Nissan Quest 2008 and is the answer not in the manual?
General| Brand | Nissan |
|---|---|
| Model | Quest 2008 |
| Category | Automobile |
| Language | English |
Controls for headlights, turn signals, and autolight system.
Indicator light for tire pressure monitoring system (TPMS).
Controls for windshield wipers, washers, and defogging.
Buttons on the steering wheel for audio and Bluetooth functions.
System to maintain and adjust vehicle speed.
Switch to control interior and puddle lamps.
Deactivates the VDC system for improved driving stability.
Disables the rear parking assist system.
Adjusts the steering wheel position for driver comfort.
Information screen for vehicle systems, navigation, and media.
System for managing cabin temperature and airflow.
Indicates the status of the front passenger airbag.
Activates hazard warning lights for emergencies.
Controls for radio, CD player, and media playback.
Port for connecting external audio devices.
Locks all vehicle doors using the keyfob.
Unlocks the driver's door or all doors.
Opens or closes the power sliding doors.
Opens or closes the power liftgate.
Configures the horn beep response for locking/unlocking.
Controls for front and rear wipers, and washer functions.
Automatically turns headlights on/off based on ambient light.
Manual control for headlights, parking lights, and tail lights.
Controls for activating and deactivating fog lights.
Using the headlight switch for turn signals and high beams.
Controls interior and puddle lamps for temporary illumination.
Operates radio, media, and Bluetooth phone functions.
Setting, resuming, and cancelling cruise control speed.
Automatic management of fan speed, airflow, and temperature.
Adjusting temperature for the driver's side.
Adjusting temperature for the passenger's side.
Directs airflow to different vents (center, side, foot, defroster).
Adjusts fan speed or uses AUTO mode.
Clears front and side windows using the defroster.
Defogs the rear window and heated side mirrors.
Turns the air conditioning system on or off.
Recirculates cabin air to improve efficiency or comfort.
Controls for rear seat climate functions.
Scans radio stations or skips tracks on CDs.
Selects radio station presets stored in memory banks.
Stores and retrieves radio presets, selects CDs.
Controls rear audio settings and headphone output.
Manual tuning, folder navigation, and audio setting adjustment.
Adjusts Bass, Mid, Treble, Fade, Balance, and SSV.
Switches between rear speakers and headphones.
Temporarily stops at radio stations during scan tuning.
Selects radio band (FM, AM, or XM®).
Initiates CD or DVD playback.
Loads single discs or multiple discs into the changer.
Port for connecting external audio devices like MP3 players.
Ejects single discs or all discs from the changer.
Displays trip info, fuel economy, and maintenance data.
Sets and resets engine oil and tire rotation intervals.
Personalizes information shown on the display screen.
Shows the area behind the vehicle when in reverse.
Adjusts hours, minutes, auto-adjust, DST, and time zone.
Alerts to obstacles and can be turned off.
Deactivates VDC for driving in snow or mud.
Stores and recalls driver seat, pedal, and mirror positions.
Automatically moves the driver's seat for easier entry/exit.
Selects and adjusts mirrors, including automatic tilt in reverse.
Adjusts the accelerator and brake pedals forward or backward.
Shows if the front passenger airbag is active or off.
Monitors tire pressure and warns of low pressure.
Reminds occupants to fasten seat belts.
Prevents rear doors from opening from the inside.
Opens the fuel filler door.
Tightening the cap and service engine soon light.
Tilts and slides the moonroof open or closed.
Opens, closes, or reverses sliding doors via keyfob or pillar buttons.
Opens, closes, or reverses the lift gate.
Adjusts seat position, seatback angle, and cushion angle/height.
Adjusts seat cushion, seatback, and lumbar support.
Adjusts the fore/aft position of the 2nd-row seats.
Adjusts the recline angle of the 2nd-row seatbacks.
Tips 2nd-row seats forward for 3rd-row access.
Folds 2nd-row seats flat for cargo hauling.
Folds the 3rd-row seat flat for maximum cargo hauling.
Safety and usage guidelines for HomeLink programming.
Steps to program the HomeLink system for openers.
Guidelines for clear communication and voice recognition.
Steps to connect a Bluetooth-enabled phone to the system.
Detailed steps to pair a phone, including PASSKEY and naming.
Adding new entries with names, numbers, and locations.
Initiating calls by name, number, or redial.
Accepting, rejecting, or hanging up calls.
Controls for ejecting, powering, and selecting media.
Selects audio/video source between DVD and AUX.
Stops disc playback.
Starts or pauses disc playback.
Accesses DVD menu and resumes play.
Shows or removes the display information screen.
Performs various functions depending on player mode.
Connects external devices like video games and players.
Instructions for playing DVDs, VCDs, and audio CDs.
Instructions for playing CDs.
Screen rotation for viewing and storage, includes remote receiver.
Adjusts headphone volume for rear passengers.
Changes audio source for rear passengers.
Switches between rear speakers and headphones.
Selects next preset or track for rear passengers.
Finds next radio station or CD track.
Allows private listening for rear seat passengers.
Power, volume, and optimal performance for wireless headphones.
Details of buttons for power, playback, menus, and keypad.
Initial setup and safety precautions for navigation system.
Reading safety precautions and accepting terms.
Displays navigation features, map, and routing information.
Features restricted or unavailable while the vehicle is in motion.
Switches between day and night screen modes and adjusts brightness.
Maneuvering the map display using the joystick.
Accessing and changing navigation preferences.
Accessing address book and programming destinations.
Displaying the current location map screen.
Modifying the route to a destination.
Adjusting the scale of the map display.
Returning to the previous function on the navigation display.
Hearing the current navigation situation via voice.
Changing between Plan View and Birdview map displays.
Displays map in a 2D road map format.
Displays map in an elevated perspective.
Navigating menu options and making adjustments.
Entering and saving the home address in the system.
Entering a street address for route calculation.
Selecting a destination from Points of Interest categories.
Starts navigation and provides visual/voice guidance.
To Next Page