DIVIDE-N-HIDE® ADJUSTABLE
FLOOR (if so equipped)
WARNING
Do not put objects heavier than 110 lbs.
(50 kg) on the load floor.
To lower:
1. Lift and open the panel.
2. Move the load floor along the upper
trim panel channels toward the rear of
vehicle until it reaches the end of the
slot.
3. Move the load floor along the lower
trim panel channels toward the front of
the vehicle until the latches lock it into
place.
4. Lift and close the panel.
To raise:
1. Lift and open the panel
2. Move the load floor along the lower
trim panel channels toward the rear of
the vehicle until it reaches the end of
the slot.
3. Move the load floor along the upper
trim panel channels toward the front of
the vehicle until the latches lock it into
place.
4. Lift and close the panel.
LIC2527 LIC2528
2-38 Instruments and controls
To Next Page
Loading...