∙ Placing the ignition switch to the ON
position.
∙ Locking the doors with the remote con-
trol.
∙ Switching the room light switch to the
OFF position.
HOW TO USE THE REMOTE
KEYLESS ENTRY FUNCTION
The remote keyless entry function can op-
erate all door locks using the remote key-
less function of the Intelligent Key. The re-
mote keyless function can operate at a
distance of 33 ft (10 m) away from the ve-
hicle. The operating distance depends
upon the conditions around the vehicle.
The remote keyless entry function will not
function under the following conditions:
∙ When the Intelligent Key is not within the
operational range.
∙ When the doors or the rear hatch are
open or not closed securely.
∙ When the Intelligent Key battery is dis-
charged.
CAUTION
When locking the doors using the Intel-
ligent Key, be sure not to leave the key in
the vehicle.
Locking doors
1. Place the ignition switch in the LOCK
position.
2. Close all doors and the rear hatch.
3. Press the
button on the Intelli-
gent Key.
4. The hazard warning lights flash twice
and the horn beeps once.
5. All doors and the rear hatch will be
locked.
WPD0359
3-18 Pre-driving checks and adjustments
To Next Page
Loading...