lever is in P (Park) or N (Neutral) position
with the parking brake fully applied.
Seat lifter (if so equipped for
driver’s seat)
Pull up or push down the adjusting lever to
adjust the seat height until the desired po-
sition is achieved.
FOLDING REAR SEAT
1. Ensure the rear outboard seat belt
tongue is properly stowed in the rear
trim slot next to the door
䊊
A
before
moving the rear seatback
䊊
B
in order to
prevent the outboard seat belt from
getting caught behind the rear seat-
back.
LRS2710 LRS2954
1-4 Safety—Seats, seat belts and supplemental restraint system
To Next Page
Loading...