Need help?Do you have a question about the Nisuta NS-WIR150N and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Wireless Speed | Up to 150 Mbps |
| Ports | 1 x 10/100M WAN, 4 x 10/100M LAN |
| Antenna | 1 x 5dBi fixed omni-directional antenna |
| Security | WEP, WPA, WPA2 |
Lists the main features of the device.
Lists the necessary hardware and software to use the Wireless Gateway.
Explains document conventions (notation, typography, messages) and how to get support.
Explains the function of each indicator LED on the router.
Details the ports and buttons on the rear, right, and bottom panels of the device.
Explains the function of each label (ANTENNA, POWER, LAN, WAN, WLAN, WPS, RESET) on the device.
Steps to configure automatic IP/DNS assignment in Windows XP.
Steps to configure automatic IP/DNS assignment in Windows Vista.
Steps to configure automatic IP/DNS assignment in Windows 7.
Instructions for configuring PCs connected via Ethernet to the Wireless Gateway.
Details physical connections and includes a safety warning before starting.
Guides users through the easy setup process using the utility CD.
Instructions to find and connect to the wireless network, handling encrypted/unencrypted types.
How to identify DHCP client connection by checking 'Assigned by DHCP' in details.
How to identify Static IP connection by checking 'Manually Configured' in details.
How to identify PPPoE client connection by checking 'Assigned by Service Provider'.
Instructions on how to access the router's web interface using a browser and default credentials.
Explains the meaning of different LED lights on the router for status indication.
Overview of the preconfigured default settings for the device.
Introduces Quick Setup and the available operation modes (Gateway, Bridge, Wireless ISP).
Step-by-step guide to configure a static IP internet connection.
Step-by-step guide to configure a DHCP client internet connection.
Step-by-step guide to configure a PPPoE internet connection.
Step-by-step guide to configure a PPTP internet connection.
Step-by-step guide to configure an L2TP internet connection.
Steps to configure the device in Access Point mode with SSID and channel settings.
Steps to configure the device in Client mode to connect to an existing AP.
Explains WDS, its benefits, and potential limitations like compatibility.
Details configurations for Main WDS Station, Repeater WDS Stations, and ESSID settings.
Steps to configure WDS only or AP + WDS modes.
Explains wireless security importance and options like WEP and WPA.
Step-by-step guide to set WEP encryption (64/128-bit, ASCII/Hex).
Step-by-step guide to set WPA/WPA2 encryption (Passphrase/HEX).
Introduces setting the router's operation mode (Gateway, Bridge, Wireless ISP).
Explains fields for Band, Mode, SSID, Channel Width, Broadcast SSID, etc.
Introduces advanced wireless settings for technical users.
Steps to configure WEP security with an encryption key.
Steps to configure WEP security using 802.1x authentication with RADIUS.
Steps to configure WPA/WPA2 security using Personal (Pre-Shared Key) mode.
Steps to configure WPA/WPA2 security using Enterprise (RADIUS) mode.
Explains MAC ACL for restricting network access based on MAC addresses.
Steps to configure the access control list to only allow specified MAC addresses.
Steps to configure the access control list to deny specified MAC addresses.
Explains WDS settings and requirements for communication between APs.
Steps to configure the device solely for WDS functionality.
Steps to configure the device for both AP and WDS roles.
Steps to set up wireless security for WDS devices, ensuring matching encryption.
Explains the Site Survey tool for scanning wireless networks.
Steps to view scanned APs and connect the Wireless Gateway to a selected AP.
Introduces WPS for easy wireless client connection and lists supported features.
Describes WPS roles (Enrollee, Registrar, Proxy) and operations.
Explains the Push Button method for WPS setup and its steps.
Steps for configuring the AP as an enrollee in WPS, including PIN entry.
Steps for configuring the AP as a registrar in WPS, including PIN or PBC methods.
Displays WPS status and current authentication/encryption key details after configuration.
Page for setting up rules for wireless schedule, requiring system time configuration.
Introduces configuring parameters for the local area network connected to the LAN port.
Steps to change the LAN IP address and default DHCP client range.
Displays a table of active DHCP clients with their IP, MAC, and lease expiry.
Lists methods for obtaining WAN IP address (Static IP, DHCP, PPPoE, PPTP, L2TP).
Explains options like Clone MAC Address, UPnP, IGMP Proxy, and VPN pass-through.
Step-by-step guide to configure a static IP internet connection.
Shows the status page for a Fixed IP connection.
Step-by-step guide to configure a DHCP client internet connection.
Shows the status page indicating a successful DHCP connection.
Step-by-step guide to configure a PPPoE internet connection.
Shows the status page indicating a successful PPPoE connection.
Step-by-step guide to configure a PPTP internet connection with ISP details.
Step-by-step guide to configure an L2TP internet connection with ISP details.
Steps to enter or disable MAC address cloning functionality.
Shows the status page confirming MAC address cloning.
Explains port filtering to restrict network traffic and secure the local network.
Explains IP filtering to restrict data packets and control traffic flow.
Explains MAC filtering to restrict access based on MAC addresses.
Example to configure port forwarding for TCP protocol to a specific IP address.
Example to configure port forwarding for UDP protocol to a specific IP address.
Explains URL filtering to deny LAN users access to websites with specific keywords.
Steps to configure the DMZ Host IP Address and enable DMZ.
Explains VLAN settings for network segmentation and security.
Explains QoS for prioritizing online gaming traffic over other network traffic.
Explains the Status page for viewing current device information like uptime and firmware version.
Explains the Statistics page for viewing packet counters for network traffic.
Explains Dynamic DNS for accessing servers using domain names and lists supported providers.
Steps to enable DynDNS, select provider, and enter user details.
Steps to enable TZO, select provider, and enter user details.
Page for setting the device's time zone and configuring NTP updates for time synchronization.
Page for configuring DoS prevention settings like packet floods and IP spoofing.
Steps to enable logging, select log types, and configure a remote log server IP.
Guides on how to manually download and install firmware updates.
Explains saving current settings to a file or reloading previous configurations.
Steps to reset the device to its original factory default configuration.
Guides on changing the default administrator username and password.
Steps to log out from the device's web interface.
Instructions for configuring PCs connected via Ethernet to work with the Wireless Gateway.
Guides on manually assigning static IP information to PCs.
Explains IPv4 addresses, their structure, notation, and network classes.
Explains subnet masks and their role in defining subnets.
Instructions for installing UPnP control point software on Windows ME and XP.
Details UPnP installation, SSDP requirements, and viewing the Internet Gateway Device.
Provides solutions for common problems with LEDs, Internet access, and login.
Explains using ping and nslookup utilities for network diagnostics.
Defines technical terms and acronyms used throughout the manual.
To Next Page
