Need help?Do you have a question about the Nitehawk RAPTOR II and is the answer not in the manual?
Introduction to the NiteHawk Raptor II sweeper and contact information.
Guidance on reading and referencing the owner's manual for effective use.
Instructions and importance of using the safety stand for hopper work.
Visual guide to safety decals on the sweeper and their meanings.
Guidance on using genuine NiteHawk parts for safety and performance.
Explains safety symbols, warnings, and general precautions for operators.
Safety guidelines for performing maintenance and repairs on the sweeper.
Identification and labeling of the sweeper's major parts and systems.
Overview and identification of hydraulic system components and their locations.
Identification of hydraulic components located behind the cab on the driver's side.
Identification of components on the hydraulic manifold from the top view.
Identification of components on the hydraulic manifold from the bottom view.
Identification of components on the hydraulic reservoir from the top view.
Explanation of hydraulic system indicators like pressure and return filters.
Details on optional features like the curb broom and dust suppression system.
Information on equipping and using the curb broom option.
How the water spray system reduces dust during sweeping operations.
Explanation of the sweeper's control panel, display, and basic operation.
Recommendations for using safety lighting and maintaining operator clearance.
Links to video tutorials for operating the sweeper.
Recommended daily checks to ensure the sweeper is in safe working order.
Intervals and tasks for routine maintenance based on mileage or time.
Procedures for annual servicing, including hydraulic fluid and filter replacement.
Precautions and information regarding hydraulic fluid in cold weather.
Step-by-step instructions for adjusting and maintaining sweeper components.
Secondary adjustment procedure for sweeping flaps to maximize lifespan.
Instructions for replacing the sweeper's rubber flaps.
Procedure for adjusting the hopper relief valve, with safety warnings.
Adjustments for curb broom tilt, pitch, and extension/retraction.
Adjusting the turnbuckle for curb broom extension and retraction.
Adjusting the spring tension for the curb broom extension assist.
Adjusting the curb broom relief valve to control broom speed.
Instructions for replacing curb broom segments.
Proper lubrication procedures for fan bearings to ensure quiet operation.
Methods for identifying and correcting leaks in the hydraulic system.
How to manually operate sweeper functions in case of electrical failure.
Procedures for replacing hydraulic lines, emphasizing safety precautions.
Common problems and their potential causes and solutions.
Troubleshooting steps when the fan fails to spin after pressure is applied.
Explanation of hydraulic oil misting due to the breather filter.
Summary of NiteHawk sweeper warranty coverage and limitations.
Summary of Isuzu chassis warranty coverage and limitations.
Detailed diagram illustrating the sweeper's hydraulic system.
A schematic diagram of the Raptor II hydraulic system.
To Next Page
General