Need help?Do you have a question about the Nixie IN-14 and is the answer not in the manual?
Adjusts the brightness of Red, Green, and Blue LEDs for each nixie tube.
Configure alarm mode, start hour, and start minute for audible alerts.
Settings for colon tube modes, hourly beeps, slot machine frequency, and animation.
Configure 12/24 hour mode, date display format, and set time/date components.
Set sleep hours, display date during sleep, and configure motion sensor timeout.
General| Digit Height | 18 mm |
|---|---|
| Typical Current | 2.5 mA |
| Number of Digits | 1 |
| Color | Orange |
| Anode Voltage | 170 V |
| Gas Filling | Neon |
| Storage Temperature | -60 to +70 °C |
To Next Page