nLight nCM 9 - Standard Range Sensor Types Reference; Ceiling Mount Sensor Models; Recessed Mount Sensor Models; Fixture Mount Sensor Models

OPTIONS
DIMMING CONTROL (D)
• Provides dimming outputs to control 0-10 VDC dimmable ballasts
• Follows dimming commands from nLight Wallpod dimmer or
SensorViewsoftware
• Adds 20 AWG violet & gray wires
ON/OFF PHOTOCELL (P)
• On/OffOperation: Full control during periods of occupancy
with adequate daylight
• Inhibit Operation: Prevents lights from turning on if adequate
daylight is available
AUTOMATIC DIMMING CONTROL PHOTOCELL (ADC)
• Photocell within sensor maintains total room light level by controlling
levels of 0-10 VDC dimmable ballasts
• Provides a second time-out period that enable the lights to go to a
dim setting before turning off
• Follows dimming commands from nLight WallPod dimmer or
SensorView software
• Adds 20 AWG violet & gray wires
LOW TEMP/HIGH HUMIDITY (LT)
• Sensor electronics are coated for corrosion resistance
• Operates down to -40º F/C
• Required for bathroom & cooler/ freezer applications
Quick Reference Guide to
nLight Standard Range Sensor Types