Nobex Proman 110 - User Manual

Need help?

Do you have a question about the Nobex Proman 110 and is the answer not in the manual?

Summary

Patented technique for easy compound mitre cuts using saw base slots for precise angles.

Quick and accurate locking for 4, 5, 6, 8, 12-sided frames and 90° cuts.

Locks at any angle between pre-set stops using a red lever for angle adjustment.

Clamp for securing workpieces, mountable in two positions for secure holding.

Aids in accurate cutting of longer work pieces with an adjustable integral length stop.

Automatically holds the saw in its upper position for easier work-piece adjustment.

Allows for pre-set cutting depth adjustment, not available on Proman 110.

Useful for storage and transport by pivoting the arm and securing the saw frame.

Formulas for calculating frame lengths for 4, 5, 6, 8, and 12-sided frames.

Measures frame width and adds play, then multiplies by two and adds picture side length.

Measures frame width and adds play, then multiplies by 1.453 and adds picture side length.

Measures frame width and adds play, then multiplies by 1.155 and adds picture side length.

Measures frame width and adds play, then multiplies by 0.828 and adds picture side length.

Measures frame width and adds play, then multiplies by 0.536 and adds picture side length.

Steps for producing bowls using compound mitre, including taping and gluing pieces.

Steps to check blade fit, tightness, arm play, upright straightness, and 90° angle accuracy.

General