TECHNICAL SPECIFICATIONS
Driver .......................Dual micro armatures
Sensitivity ................... 95 dB SPL @ 1 kHz
Impedance ....................... 43 Ohm@ 1 kHz
Frequency ...........................20Hz - 20 kHz
Cord length ........................... 730/320 mm
Cord diameter ......................... 2.0/1.5 mm
Housing ............................. Stainless steel
Sleeves ........................................ Silicone
Y-Split......Thermoplastic Elastomers - TPE
Cords ........................Kevlar, Copper, TPE
Cord holders ...................................... TPE
Strain Reliefs ..................................... TPE
SOUND CHARACTERISTICS
The dual micro armature with its separate
tweeter and woofer is designed for high
fidelity. The earphones deliver a precise
and detailed sound throughout the entire
sonic spectrum, backed by natural bass.
MATERIALS & DESIGN
Every part, from the stainless steel
housing and noise isolating silicone
sleeves to the Kevlar reinforced cables,
have been carefully designed to offer
the best possible experience.
GENERAL INTRODUCTION - 3
To Next Page
Loading...