Serie Home
English
12
• Stirrer beater
1) Assemble --> Use “P” speed to set the best location then Insert the beater into the outlet of arm
as A picture.
2) Disassemble --> Use “P” speed to set the best location for easy disassembly work.
take the (2) mixing bowl out from the machine firstly as B picture.
Release the beater as C picture.
3) Do not disassemble the beater as D picture.
• Whisk
1) Assemble --> Use “P” speed to set the best location then Insert the whisk into the outlet of arm
as A picture by the plastic part of whisk.
2) Do not hold the Stainless Steel whisk to insert into the outlet of arm, it will make the whisk
distorted.
3) Disassemble --> Use “P” speed to set the best location for easy disassembly work.
take the (2) mixing bowl out from the machine firstly as B picture.
Use the bar to release the beater as C picture.
Do not assemble or disassemble the beater as D and E picture.
To Next Page
Loading...