Pretiahnite bezpečnostné lanko cez výklopné rameno (V) a urobte uzol na konci lanka.
Presvedčte sa, že kotva na zadnej strane rebrín je pevná. Aby ste to zistili, vyklope rameno.
Bezpečnostné lanko musí byť napnuté a kotva na zadnej strane bočnej lišty (A) je pevne
uchytená v diere (viď obrázok).
Zakryte dieru v sklápacom ramene (V) plastovou krytkou.
Thread the security rope through the hole in the folding arm (V) and make a tight
knot at the end of the rope.
Now make sure the stopper at the back of the security rope is tight against the wood string
(A). To check this, fold out the folding arm assembly. Make sure the security rope is tight
and the stopper at the back of the wooden bracket (A) is tight to the whole in the wooden
string (see picture).
Use the plastic cap to cover the holes on side of the folding arm (V).
To Next Page
Loading...
