Nokia 3 User Guide
1. Tap Settings > Bluetooth .
2. Switch Bluetooth to On .
3. Make sure the other device is switched on.
You may need to start the pairing process
from the other device. For details, see the
user guide for the other device.
4. To pair your phone and the device, tap the
device on the list of discovered Bluetooth
devices.
5. You may need to type in a passcode. For
details, see the user guide for the other
device.
Since devices with Bluetooth wireless technology communicate using radio waves, they do not
need to be in direct line-of-sight. Bluetooth devices must, however, be within 10 meters (33
feet) of each other, although the connection may be subject to interference from obstructions
such as walls or from other electronic devices.
Paired devices can connect to your phone when Bluetooth is switched on. Other devices can
detect your phone only if the Bluetooth settings view is open.
Do not pair with or accept connection requests from an unknown device. This helps to protect
your phone from harmful content.
Disconnect a paired Bluetooth device
If you don’t need to keep your phone connected to the other device anymore, you can
disconnect them.
1. Tap Settings > Bluetooth .
2. Tap the name of the paired device.
3. Tap OK to confirm.
When you switch the other device on again, the connection reopens automatically.
Remove a pairing
If you no longer have the device with which you paired your phone, you can remove the pairing.
1. Tap Settings > Bluetooth .
2. Tap next to a device name.
3. Tap FORGET .
Connect to your friend’s phone with Bluetooth
You can use Bluetooth to wirelessly connect to your friend’s phone, to share photos, and much
more.
© 2023 HMD Global Oy. All rights reserved. 34
To Next Page
Loading...
Need help?
General
