PAGE 11 (17) Approved 1.0
Nokia Mobile Phones Customer Care E&A
SQX 00443-en MWy
Technical Services, Repair Concepts Confidential 22.05.2002
Remove the Metal Frame.
If you hold the UI module upside down, the Speaker
drops out of its hollow.
The next step is to take away the Radio Module
BF4A.
Lift up the Battery Connector with your fingers.
Remove the Power Key.
To loosen the System Connector you can use SRT-6
opening tool. Take care not to scratch the D-Cover or
the connector housing.
The Microphone can be changed separately. To
remove it from the connector housing, you have to
push it with e.g. Torx Driver.
When re-assembling the Microphone remember the
right direction. The hole of the Microphone has to
point to the hole of the connector housing.
Service Manual 3510 Level 2 Copyright 2002 © Nokia Corporation