PAGE 12 (17) Approved 1.0
Nokia Mobile Phones Customer Care E&A
SQX 00443-en MWy
Technical Services, Repair Concepts Confidential 22.05.2002
The SALT Speaker is taped to the D-Cover and can be
removed with a straight bladed screwdriver.
If you need to change the Vibra Motor, strong
tweezers or pliers can be taken.
Remove the SIM Card Support using this way.
The Release Spring is locked on two sides. Use a
screwdriver to unlock the two snaps.
After releasing the two hooks, you can remove the
Release Spring easily.
When assembling the phone, screws must be
tightened with a torque of 28 Ncm!
The GoNoGo test verifies that the electrical
specifications will be fulfilled.
Service Manual 3510 Level 2 Copyright 2002 © Nokia Corporation
To Next Page
Loading...
