[ 105 ]
Profiles
• Ringing tone - To set the ringing tone for voice calls, choose a
ringing tone from the list. When you scroll through the list, you
can stop on a tone to listen to it before you make your selection.
Press any key to stop the sound. If a memory card is used, tones
stored on it have the icon next to the tone name. Ringing
tones use shared memory. See “Shared memory” on p. 19.
Note:
You can change ringing tones in two places: Profiles or Contacts.
See “Add a ringing tone for a contact card or group” on p. 54.
• Ringing options - When Ascending is selected, the ringing
volume starts from level one and increases level by level to the
set volume level.
• Ringing volume - To set the volume level for the ringing and
message alert tones.
• Message alert tone - To set the tone for messages.
• Vibrating alert - To set the phone to vibrate at incoming voice
calls and messages.
• Keypad tones - To set the volume level for keypad tones.
• Warning tones - The phone sounds a warning tone, for example,
when the battery is running out of power.
• Alert for - To set the phone to ring only upon calls from phone
numbers that belong to a selected contact group. Phone calls
coming from people outside the selected group will have a silent
alert. The choices are All calls / (list of contact groups, if you have
created them). See “Create contact groups” on p. 56.
• Profile name - You can rename a profile with any name you want.
The Normal profile cannot be renamed.
To Next Page
Loading...
