[ 142 ]
CANCEL PAIRING
• In the Paired devices view, scroll to the device whose pairing you want
to cancel and press or select
Options
→
Delete
. The device is
removed from the Paired devices list and the pairing is cancelled.
• If you want to cancel all pairings, select
Options
→
Delete all
.
Note:
If you are currently connected to a device and delete the pairing
with that device, pairing is removed immediately but the connection
will remain active.
ASSIGN SHORT NAMES FOR PAIRED DEVICES
You can define a short name (nickname, alias) to help you recognize a
certain device. This name is stored in the phone memory and cannot be
seen by other Bluetooth device users.
Example:
Give a short name to your friend’s Bluetooth enabled device or
to your own computer to be able to recognize it more easily.
To assign a short name, scroll to the device and select
Options
→
Assign
short name
. Write the short name and press
OK
.
Note:
Choose a name which is easy to remember and recognize. Later when
you are searching for devices or a device is requesting a connection,
the name you have chosen will be used to identify the device.
SET A DEVICE TO BE AUTHORIZED OR UNAUTHORIZED
After you have paired with a device, you can
set it to be authorized or unauthorized:
Unauthorized
(default) - Connection requests
from this device need to be accepted separately
every time.
Authorized
- Connections between your
phone and this device can be made without
your knowledge. No separate acceptance or
authorization is needed. Use this status for
your own devices, for example, your PC, or
devices that belong to someone you trust. The icon is added next to
authorized devices in the Paired devices view.
To Next Page
Loading...
