[ 13 ]
General information
DATA CONNECTION INDICATORS
• When an application is establishing a data connection, one of the
indicators below blinks in standby mode.
• When an indicator is shown continuously, the connection is active.
Note:
Check with your service provider for availability of high-speed
data calls.
ACCESSORY INDICATORS
The following icons indicate that an accessory is connected to your phone:
Indicates that all calls to the phone are forwarded. Indicates
that all calls to the phone are forwarded to a voice mailbox. See
“Settings for call forwarding” on p. 24. If you have two phone
lines, the forward indicator for the first line is and for the
second line . See “Line in use (system service)” on p. 34.
Indicates that you can make calls using phone line 2 only
(system service). See “Line in use (system service)” on p. 34.
for a data call
for a high-speed data call
shown instead of the antenna symbol when there is an active
GPRS connection
for when the GPRS connection is put on hold during voice calls
for a fax call
for a Bluetooth connection
for an infrared connection
a headset is connected
a loopset is connected
To Next Page
Loading...
