[ 81 ]
Messaging
Settings needed for multimedia messaging
Options in the multimedia message editor are:
Send
,
Add recipient
,
Insert
,
Preview message
,
Objects
,
Remove
,
Delete
,
Message details
,
Sending options
,
Help
, and
Exit
.
You may receive the settings as a smart message from your service
provider. See “Receive smart messages” on p. 88.
For availability of and subscription to data services, please contact your
service provider.
1
Go to
Settings
→
Connection settings→
Access points
and define the settings for a
multimedia messaging access point:
Connection name - Give a descriptive name
for the connection.
Session mode - Select a data connection
type: GSM data, High speed GSM, or GPRS.
Gateway IP address - enter the address.
Example:
Domain names such as
www.nokia.com
can be translated into
IP addresses like
192.100.124.195
.
Homepage - enter the address of the multimedia messaging center.
• If you selected GSM data or High speed GSM, fill in Dial-up
number - a phone number for the data call.
• If you selected GPRS, fill in Access point name - the name given
to you by your service provider.
For further information on different data connections, see also
“Connection settings” on p. 35.
2
Go to
Messaging
→
Options→
Settings→
Multimedia message
.
3
Open Preferred connection and select the access point you created to
be used as the preferred connection. See also “Settings for multimedia
messages” on p. 99.
To Next Page
Loading...
