[ 111 ]
Messaging
• Send message - Define how e-mail is sent from your phone.
Immediately - A connection to the mailbox is started immediately
after you have selected Send. During next conn. - E-mail is sent when
you connect to your remote mailbox the next time.
• Send copy to self - Select Yes to save a copy of the e-mail to your
remote mailbox and to the address defined in My mail address.
• Include signature - Select Yes if you want to attach a signature to your
e-mail messages and to start to write or edit a signature text.
• User name: - Write your user name, given to you by your service
provider.
• Password: - Write your password. If you leave this field blank, you will
be prompted for the password when you try to connect to your
remote mailbox.
• Incoming mail server: (Must be defined) - The IP address or host name
of the computer that receives your e-mail.
• Mailbox type: - Defines the e-mail protocol your remote mailbox
service provider recommends. The options are POP3 and IMAP4.
Note: This setting can be selected only once and cannot be changed if
you have saved or exited from the mailbox settings.
• Security - Used with the POP3, IMAP4, and SMTP protocols to secure
the connection to the remote mailbox.
• APOP secure login - Used with the POP3 protocol to encrypt the
sending of passwords to the remote e-mail server. Not shown if
IMAP4 is selected for Mailbox type:.
• Retrieve attachment (not shown if the e-mail protocol is set to POP3)
- To retrieve e-mail with or without attachments.
• Retrieve headers - To limit the number of e-mail headers you want to
retrieve to your phone. The options are All and User defined. Used with
IMAP4 protocol only.
To Next Page
Loading...
