[ 14 ]
- Indicates that all calls to the phone are
forwarded. Indicates that all calls to the
phone are forwarded to a voice mailbox. See
“Settings for call forwarding” on page 26. If
you have two phone lines, the forward
indicator for the first line is and for the
second line . See “Line in use (system
service)” on page 36.
- Indicates that you can make calls using
phone line 2 only (system service). See “Line
in use (system service)” on page 36.
DATA CONNECTION INDICATORS
• When an application is establishing a data connection, one of the
indicators below blinks in standby mode.
• When an indicator is shown continuously, the connection is active.
for a data call, for a high speed data call,
Note: Check with your service provider for availability of high speed data
calls.
is shown instead of the signal strength indicator when there is an
active GPRS connection. for when the GPRS connection is put on hold
during voice calls.
for a fax call,
for a Bluetooth connection, and
for an infrared connection.
• MENU
To Next Page
Loading...
