[ 89 ]
Messaging
Note: This function can be used only if it is supported by your service
provider. Only devices that offer multimedia message or e-mail
features can receive and display multimedia messages. Devices
that don’t have these features may receive details of a link to a
web page.
SETTINGS NEEDED FOR MULTIMEDIA MESSAGING
Options in the multimedia message editor are: Send, Add recipient, Insert,
Preview message, Objects, Remove, Delete, Message details, Sending options,
Help, and Exit.
You may receive the settings as a smart message from your service
provider. See “Receive smart messages” on page 96.
For availability of and subscription to data services, please contact your
service provider.
1 Go to Settings→ Connection settings→ Access
points and define the settings for a
multimedia messaging access point:
Connection name - Give a descriptive name
for the connection.
Session mode - Select a data connection type:
GSM data, High speed GSM, or GPRS.
Gateway IP address - enter the address
Example: Domain names such as www.nokia.com can be translated into
IP addresses like 192.100.124.195.
Homepage - enter the address of the multimedia messaging center.
• If you selected GSM data or High speed GSM, fill in: Dial-up number
- a phone number for the data call.
• If you selected GPRS, fill in: Access point name - the name given to
you by your service provider.
For further information on different data connections, see “Connection
settings” on page 37.
To Next Page
Loading...
