32
3
Scroll to
Edit
, then press
OK
.
4
Enter your security code (see page 63), then press
OK
.
5
At
Dialing sequence
, press
Select
. Press to choose
the dialing sequence your card uses, then press
Select
.
Note: The order of the following steps may vary, depending
on which dialing sequence your card uses.
6
Enter the access number (usually the 1-800 number
listed on the back of the calling card), then press
OK
.
7
Enter your card number and/or PIN, then press
OK
. Your
phone will display
Save changes?
Press
OK
.
8
Press to reach
Card name
, then press
Select
. Enter
the card name using your phone’s keypad, then press
OK
.
Note: This procedure might not work with all calling cards.
Please look at the back of your calling card or contact your
long distance company for more information.
Choosing a calling card to use
Use
Menu
4 1 3 to select a calling card to use. You are
required to enter your security code.
Dialing
sequence
Use for cards that
require you to:
Cards using
this sequence
Access no.
+ phone no.
+ card no.
Dial 1-800 access number,
then phone number, then card
number (+ PIN if required)
MCI, AT&T
True Choice,
Sprint Canada,
Unitel
Access no.
+ card no.
+ phone no.
Dial 1-800 access number,
then card number (+ PIN if
required), then phone number
networkMCI,
WorldPhone
MCI
Prefix
+ phone no.
+ card no.
Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number (+ PIN if required)
GTE, PacBell,
AT&T, Stentor
To Next Page
Loading...
