PAGE 9 (17) Approved 1.0
Nokia Mobile Phones Customer Care E&A
SQX 00359-en MWy
Technical Services, Repair Concepts Confidential 15.01.2002
This is the screw, which fixes the Antenna and holds
the module inside the A-Cover.
Don’t touch the Antenna with your fingers. The
fingerprints would cause corrosion to this sensitive
material.
Lifting up the CMT module is very easy now. Protect
the display with a foil.
Four clear plastic clips hold the UI module on the
CMT module. Unlock these clips when you need to
remove the UI module.
Please keep in mind always not to touch the pads
with your finger to avoid corrosion.
If you want to remove Speaker or Buzzer do not grab
the items at the spring contacts.
New screws have a special locking compound on
the thread. Never take used screws a second time!
When assembling the phone, screws must be
tightend with a torque of 17 Ncm !
The final GoNoGo test verifies that the electrical
specifications will be fulfilled.
Service Manual 6310 Level 2 Copyright 2002 © Nokia Coperation
To Next Page
Loading...
