[ 53 ]
Messages
1
2 Enter the voice mailbox area code and phone number,
OR to retrieve the number from your Phone book as follows:
a) Press Options and then press Find.
b) Scroll until the voice mailbox number is highlighted and
press Select.
c) Press OK.
3 Press Ok. Your phone confirms the number has been saved.
Tip:Save yourself the trouble of entering the voice mailbox
PIN code each time you dial your voice mailbox by using
dialing codes. See “Automate your voice mailbox with codes”
later in this section for more information.
Listen to your voice messages
Once you’ve setup your voice mailbox, you can dial it one of three ways.
• Dial the voice mailbox number using the keypad
• Press and hold .
•Press Listen if there’s a notification message on the screen.
For more information on the use of voice mail, please contact your
wireless service provider.
• AUTOMATE YOUR VOICE MAILBOX WITH CODES
You can insert special codes into entries in your Phone book to automate
tasks such as checking your voice mail. To do this, you’ll need to save your
voice mailbox number, PIN code, and the necessary pause and wait codes
to a 1-touch dialing location (often assigned to the .) The special
dialing codes are as follows:
Special Dialing Codes
* Asterisk. Use this character to bypass a set of instructions
To Next Page
Loading...
