[ 89 ]
Services (Wireless Internet)
12
• Login type - Select Manual or Automatic. If you select Manual when
the GPRS connection is set to Always online, the Always online
connection will be disabled.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
• MAKING A WIRELESS INTERNET CONNECTION
First, make sure that the service settings of the WAP service you want to
use are activated. To activate the settings:
• Press Menu, select Services and Settings. Select Active service
settings and scroll to the set you want to activate and press Activate.
Second, make a connection to the WAP service. There are two ways to
connect:
• Press Menu, select Services and Home.
Tip:To quickly open the homepage of a WAP service:
•In standby mode, press and hold .OR
• Select a bookmark of the WAP service: Press Menu, select
Services, Bookmarks, and select a bookmark. If the bookmark does
not work with the current active service settings, activate
another set of service settings and try again.
• Key in the address of the WAP service: Press Menu, select Services and
then Go to address. Key in the address of the WAP service, press
for special characters, and press OK (availability of this option may
vary by service provider).
Note: It is not necessary to add the prefix http:// in front of the
address since it will be added automatically.
To Next Page
Loading...
