6600 fold RM-325
Service Manual Level 1&2
ISSUE 2
Confidential
Copyright @ 2008 NOKIA. All rights reserved
13
7.) Unscrew the two screws with SS-152 (SCREW
BIT TX2IP) in the order shown.
Always use new screws after disassembling!
8.) Remove the HINGE LID ASSY.
9.) Upper and lower block can be separated a
little.
10.) Disconnect the TOP FLEX ASSEMBLY carefully
from the PWB with SS-93.
11.) Separtate the upper and lower blocks. 12.) Remove the HINGE MOTOR with a tweezers.
To Next Page
Loading...
