Nokia 6600 - Page 14

nokia
CONNECTING PEOPLE
PAGE 14 (27) Approval 2.0
Nokia Mobile Phones Customer Care EMEA
DJk
Technical Services, Repair Concepts Confidential 30.10.2003
Lift the A-Cover on its bottom side carefully. Place the
SRT-6 in the groove and shift it to the next mark. Then
press in the tip as in the step above.
The same procedure on the other side.
Now, the A-Cover can be pulled up. Always protect the
inner side of the window and LCD with a film.
Remove Keypad…
…and Joystick Hat. Unscrew the four Torx Plus
®
size 6 screws using the
order shown. For assembly, the reverse order and a
Torx Plus
®
driver with a torque of 19Ncm have to
be used.
Take the phone from the jig.
The UI Support Frame is attached with four snaps in B-
Cover.
Service Manual 6600 Level 1&2 Copyright 2003 © Nokia Corporation