Nokia 6720 classic RM-424 / RM-564
Service Manual Level 1&2
13 Confidential • Copyright © 2009 NOKIA • All rights reserved Version 1.0 ISSUE 1
7) Begin to release the A-COVER ASSEMBLY with the
SS-93 around the DC-JACK area as shown.
8) Continue to release the A-COVER ASSEMBLY around
the AV-JACK area as shown. Be very careful not to
bend the A-COVER ASSEMBLY!
9) Finally release both sides of the A-COVER
ASSEMBLY with the SS-93 as shown.
10) The A-COVER ASSEMBLY can now be removed.
Remember to protect the LCD with protective film.
11) Separate the KEYMAT from the A-COVER by
pressing the KEYMAT lightly.
12) Use the SRT-6 to open the small clip on the right
side of the UI-FLEX ASSEMBLY.
To Next Page
Loading...
