Deploying Pre-provisioned Components for 7210 SAS-R6 and 7210 SAS-R12
Page 118 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
NOTES:
1. This step is not needed for platforms such as a 7210 SAS-M, 7210 SAS-T, 7210 SAS-X, 7210
SAS-Mxp, 7210 SAS-Sx/S 1/10GE and 7210 SAS-Sx 10/100GE, that do not support remov-
able cards. On platforms with fixed cards, the card type is auto-provisioned. It is typically used
only on platforms that are chassis based and support slots for inserting cards, like the 7210
SAS-R6 and 7210 SAS-R12.
2. This step is required only if the platform supports use of physical MDAs, like the 7210 SAS-
M. It is not required on platforms that do not support an MDA, like 7210 SAS-X, 7210 SAS-T,
7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx 10/100GE, 7210 SAS-R6 and 7210 SAS-R12. 7210
SAS-Mxp does not have a expansion slot and hence does not support MDA.