EasyManuals Logo

Nokia 7210 SAS-M Configuration Guide

Nokia 7210 SAS-M
394 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #133 background imageLoading...
Page #133 background image
Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 133
Configuring Channelized Ports
This section is applicable only when using the CES MDA that supports 4 x T1/E1 ports. CES
MDA is available for use only on the 7210 SAS-M platform in network mode (it cannot be used in
access-uplink mode). It cannot be used on any other 7210 SAS platform.
When configuring channelized ports, the port ID is specified in different ways depending on the
MDA type and level of channelization. Ethernet ports cannot be channelized.
Configuring a Channelized DS1 Card
7210 SAS-M support CES MDA that support 4 port channelized DS-1 cards. The channelization
is as follows:
N*DS0 in DS1 port.{1..24}
N*DS0 in E1 port.{1..32}
To make sure you have a channel-capable MDA, verify the MDA-type you are configuring by
entering a show mda slot-id command.
In the following example, MDA 2 shows a channelized DS1 MDA:
In the TDM E1 context, configure DS0 channel groups and their parameters. For a DS1 channel
group, up to 24 timeslots can be assigned (numbered 1..24). For an E1 channel-group, up to 31
timeslots can be assigned (numbered 2..32). Only CES services (i.e. CESoPSN and SAToP) are
supported with CES MDA on 7210 SAS-M in network mode.
Configuration Examples follows:
ALA-A>config>port>tdm# e1 1.1
ALA-A>config>port>tdm>e1# channel-group 1
ALA-A>config>port>tdm>e1>channel-group# timeslots 2
ALA-A>config>port>tdm>e1>channel-group# no shutdown
ALA-A>config>port>tdm>e1>channel-group#
ALA-A>config>port>tdm>e1# no shutdown
ALA-A>config>port>tdm>e1# channel-group 2
ALA-A>config>port>tdm>e1>channel-group# timeslots 3
ALA-A>config>port>tdm>e1>channel-group# no shutdown
ALA-A>config>port>tdm>e1>channel-group# exit
ALA-A>config>port>tdm>e1# channel-group 3
ALA-A>config>port>tdm>e1>channel-group# timeslots 11,12
ALA-A>config>port>tdm>e1>channel-group# no shutdown
ALA-A>config>port>tdm>e1>channel-group# exit
ALA-A>config>port>tdm>e1# no shutdown
ALA-A>config>port>tdm>e1# exit

Other manuals for Nokia 7210 SAS-M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nokia 7210 SAS-M and is the answer not in the manual?

Nokia 7210 SAS-M Specifications

General IconGeneral
BrandNokia
Model7210 SAS-M
CategoryCell Phone
LanguageEnglish

Related product manuals