Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 139
Deleting a Card
The delete operation cannot be performed on an IOM card that is auto equipped and auto
provisioned during bootup and is fixed.
CLI Syntax: config> port port-id
shutdown
CLI Syntax: config> card slot-number
card-type card-type
mda mda-number
no mda-type mda-type
no shutdown
Deleting Port Parameters
Use the following CLI syntax to delete a port provisioned for a specific card:
CLI Syntax: config>port port-id
shutdown
no port port-id