Command Reference
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 143
Port-based Split Horizon Group Configuration Commands
NOTE: This feature and commands are available only on 7210 SAS-M, 7210 SAS-T (both
access-uplink and network mode) and 7210 SAS-X
.
config
—Port Configuration Commands
— port
—no port
— split-horizon-group group-name
—no split-horizon-group
config
—LAG Commands
— [no] lag [lag-id]
—[no] split-horizon-group group-name