Generic Commands
Page 158 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
Generic Commands
description
Syntax description long description-string
no description
Context config>port
config>lag
config>port>tdm>e1>channel-group
config>port>tdm>ds1>channel-group
Description This command creates a text description for a configuration context to help identify the content in the
configuration file.
The no form of this command removes any description string from the context.
Default No description is associated with the configuration context.
Parameters long-description-string — The description character string. Strings can be up to 160 characters long
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces,
etc.), the entire string must be enclosed within double quotes.
shutdown
Syntax [no] shutdown
Context config>card
config>card>mda
config>port
config>port>ethernet
config>lag
config>port>ethernet>efm-oam
config>port>tdm>ds1>channel-group
config>port>tdm>e1>channel-group
config>port>ethernet>ssm
Description This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained within.
The no form of this command administratively enables an entity.
card — The default state for a card is no shutdown.
mda — The default state for a mda is no shutdown.
lag — The default state for a Link Aggregation Group (LAG) is shutdown.
To Next Page
Loading...
Need help?
General
