Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 163
Interface QoS Commands
access
Syntax access
Context config>port
Description Platforms Supported: 7210 SAS-M, 7210 SAS-T, 7210 SAS-X, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx
10/100GE, 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12.
This command enables the access context to configure egress and ingress pool policy parameters.
network
Syntax network
Context config>port
Description Platforms Supported: 7210 SAS-M, 7210 SAS-T, 7210 SAS-X, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx
10/100GE, 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12.
This command enables the network context to configure egress and ingress pool policy parameters.
uplink
Syntax uplink
Context config>port>access
Description Platforms Supported: 7210 SAS-M and 7210 SAS-T.
This command enables the context to configure access pool parameters.
egress
Syntax egress
Context config>port>access
config>port>network
config>port>uplink
Description Platforms Supported: 7210 SAS-M, 7210 SAS-T, 7210 SAS-X, 7210 SAS-Sx/S 1/10GE, 7210 SAS-Sx
10/100GE, 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12.