Nokia 7210 SAS-M Configuration Guide

Ethernet Port Commands
Page 196 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
configurable on TDM ports. For the code-type, SDH refers to ITU-T G.781 Option-1,while SONET refers to
G.781 Option 2 (equivalent to Telcordia GR-253-CORE).
Default sdh
Parameters sdh — Specifies the values used on a G.781 Option 1 compliant network.
sonet — Specifies the values used on a G.781 Option 2 compliant network.
tx-dus
Syntax [no] tx-dus
Context config>port>ethernet>ssm
config>port>sonet-sdh
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command forces the QL value transmitted from the SSM channel of the SONET/SDH port or the
Synchronous Ethernet port to be set to QL-DUS/QL-DNU. This capability is provided to block the use of
the interface from the SR/ESS for timing purposes.
Default no tx-dus

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English