Nokia 7210 SAS-M Configuration Guide

LLDP Ethernet Port Commands
Page 206 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
Default no tx-mgmt-address
Parameters system — Specifies to use the system IPv4 address.
system-ipv6 — — Specifies to use the system IPv6 address.
Note that system-ipv6 parameter can only be used on platforms that support IPv6.
tx-tlvs
Syntax tx-tlvs [port-desc] [sys-name] [sys-desc] [sys-cap]
no tx-tlvs
Context config>port>ethernet>lldp>dstmac
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command specifies which LLDP TLVs to transmit. The no form of the command resets the value to the
default.
no tx-tlvs
Parameters port-desc — Indicates that the LLDP agent should transmit port description TLVs.
sys-name — Indicates that the LLDP agent should transmit system name TLVs.
sys-desc — Indicates that the LLDP agent should transmit system description TLVs.
sys-cap — Indicates that the LLDP agent should transmit system capabilities TLVs.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English