Nokia 7210 SAS-M Configuration Guide

Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 211
Default 'NotApplicable'.
length
Syntax length {133 | 266 | 399 | 533 | 655}
Context config>port>tdm
Description Platforms Supported: 7210 SAS-M.
This command configures the line length for the physical DS1 port on the T1/E1 card.
Default 133
line-impedance
Syntax line-impedance {75 | 100 | 120}
Context config>port>tdm
Description Platforms Supported: 7210 SAS-M.
This command configures the line impedance of a port. Line impedance is set on a per-port basis and ports
on the same card can have different values. Before changing the line impedance of a port, the port must be
shut down.
Default 100 for DS1
120 for E1
Parameters 100 for DS1
120 or 75 for E1
channel-group
Syntax [no] channel-group channel-group-id
Context config>port>tdm>ds1
config>port>tdm>e1
Description Platforms Supported: 7210 SAS-M.
This command creates DS0 channel groups in a channelized DS1 or E1 circuit. Channel groups cannot be
further subdivided.
The no form of this command deletes the specified DS1 or E1 channel.
Default None
Description channel-group-id — Identifies the channel-group ID number.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English