Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 237
one-way-delay-threshold
Syntax one-way-delay-threshold seconds
Context config>eth-ring>path>eth-cfm>mep
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command enables one way delay threshold time limit.
Default 3 seconds
Parameters priority — Specifies the value for the threshold in seconds.
Values 0 — 600
shutdown
Syntax [no] shutdown
Context config>eth-ring>path>eth-cfm>mep
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command administratively enables or disables the MEP.
The no form of this command disables or enables the MEP.
Default shutdown
shutdown
Syntax [no] shutdown
Context config>eth-ring>path
config>eth-ring
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command administratively enables or disables the path.
The no form of this command disables or enables the path.
Default shutdown