Nokia 7210 SAS-M Configuration Guide

Multi-Chassis Redundancy Commands
Page 240 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
Multi-Chassis Redundancy Commands
redundancy
Syntax redundancy
Context config
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command allows the user to configure redundancy operations.
multi-chassis
Syntax multi-chassis
Context config>redundancy
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command enables the context to configure multi-chassis parameters.
peer
Syntax [no] peer ip-address create
Context config>redundancy>multi-chassis
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
Use this command to configure up to 20 multi-chassis redundancy peers. Note that is is only for mc-lag (20)
not for mc-sync (4).
Parameters ip-address — Specifies the IP address.
Values ipv4-address: a.b.c.d
create — Mandatory keyword specifies to create the peer.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English