Nokia 7210 SAS-M Configuration Guide

Multi-Chassis Redundancy Commands
Page 244 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
Values xx:xx:xx:xx:xx:xx - xx [00..FF]
remote-lag lag-id — Specifies the LAG ID on the remote system.
Values 1 — 2001 — 64
system-priority system-priority — Specifies the system priority to be used in the context of the MC-LAG.
The partner system will consider all ports using the same lacp-key, system-id, and system-priority as
part of the same LAG.
Values 1 — 65535
source-address
Syntax source-address ip-address
no source-address
Context config>redundancy>multi-chassis>peer
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command specifies the source address used to communicate with the multi-chassis peer.
Parameters ip-address — Specifies the source address used to communicate with the multi-chassis peer.
peer-name
Syntax peer-name name
no peer-name
Context config>redundancy>multi-chassis>peer
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command specifies the peer name used to communicate with the multi-chassis peer.
Parameters name — Specifies the name used to communicate with the multi-chassis peer.
sync
Syntax [no] sync
Context config>redundancy>multi-chassis>peer
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command enables the context to configure synchronization parameters.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English