Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 253
Output Show Card Output — The following table describes show card output fields.
*A:MTU-A# show card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Equipped Admin Operational
Card-type Card-type State State
-------------------------------------------------------------------------------
1 iom-24g iom-24g up up
A sfm-24g sfm-24g up up/active
===============================================================================
*A:MTU-A#
*A:ces-A# show card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Equipped Admin Operational
Card-type Card-type State State
-------------------------------------------------------------------------------
1 iom-sas iom-sas up up
A sfm-sas sfm-sas up up/active
===============================================================================
Sample output for 7210 SAS-X:
A:7210-SAS-X > show card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Equipped Admin Operational
Card-type Card-type State State
-------------------------------------------------------------------------------
Label Description
Slot
The slot number of the card in the chassis.
Provisioned
Card-type
The card type that is configured for the slot.
Equipped Card-
type
The card type that is actually populated in the slot.
Admin State
Up — The card is administratively up.
Down — The card is administratively down.
Operational
State
Up — The card is operationally up.
Down — The card is operationally down.